The ATE wheel hub cleaning set 1 for standard wheel hubs allows you to clean the wheel hub quickly, safely and at low cost, before the brake disks are fitted. The mounting face for the brake disks on the wheel hub must be bright before the disk is mounted to ensure that ít lies fully flush. Only then can it be guaranteed that the installation tolerances of the brake disks can be adhered to. The cleaning process does not normally take more than 10 seconds per hub. The hole in the cleaning disk provides firm guidance and ensures that the disk does not slip off the hub. The fact that the entire surface of the disk is used ensures a lifetime of approximately 400 cleaning operations

Package Contents: 1 holder, 3 disks

Technical Specifications: disk external diameter = 160mm, hole diameter = 60mm

Replacement disks for set 1 - 760109

The ATE wheel hub cleaning set 2 for wheel hubs with studs allows you to clean the wheel hub quickly, safely and at low cost, before the brake disks are fitted. The mounting face for the brake disks on the wheel hub must be bright before the disk is mounted to ensure that ít lies fully flush. Only then can it be guaranteed that the installation tolerances of the brake disks can be adhered to. Two different sizes of cleaning disks and the corresponding holders allow the best possible finish around the studs over which the disks are passed. The cleaning process does not normally take more than 10 seconds per hub. The hole in the cleaning disk provides firm guidance and ensures that the disk does not slip off the hub. The fact that the entire surface of the disk is used ensures a lifetime of approximately 400 cleaning operations

Package Contents: 2 holders, 5 small disks, 5 large disks

Technical Specifications:
     Small disks - external diameter = 40mm, hole diameter = 13mm
     Large disks - external diameter = 53mm, hole diameter = 13mm

Small replacement disks for set 2 - 760110

Large replacement disks for set 2 - 760110

The ATE wheel hub cleaning set 3 for large wheel hubs or wheel hubs with a large clooar (e.g. Transporters and BMW vehicles) allows you to clean the wheel hub quickly, safely and at low cost, before the brake disks are fitted. The mounting face for the brake disks on the wheel hub must be bright before the disk is mounted to ensure that ít lies fully flush. Only then can it be guaranteed that the installation tolerances of the brake disks can be adhered to. The cleaning process does not normally take more than 10 seconds per hub. The hole in the cleaning disk provides firm guidance and ensures that the disk does not slip off the hub. The fact that the entire surface of the disk is used ensures a lifetime of approximately 400 cleaning operations

Package Contents: 1 holder, 2 disks

Technical Specifications: disk external diameter = 200mm, hole diameter = 85mm

Replacement disks for set 3 - 760111